When it’s been a while because you have painted or stained your moulding, you will need to sand the area carefully to remove blemishes and paint. Over time, ornate details can be hidden by several coats of paint on such structures, and globs and drips of paint could have gathered in crevices that are specific. Sanding the moulding down to its unique area before staining or painting will guarantee that individuals see elegance and the craftsmanship of the molding rather of any imperfections.
Put on a respirator as well as protective eyewear. Lay down a drop cloth or newspaper in the workshop, in the event the moulding is along the ceiling and set up a ladder.
Plug in a vacuum using a hose attachment and start. Climb the ladder cautiously while keeping the attachment (or have someone hand you the attachment when you have climbed up). Suck up cobwebs and dirt across the moulding. For foundation moulding, use the hose attachment to suck up dirt where the ground is met by the moulding.
Set the vacuum apart when completed, and fill a bucket with water and soap. Place the bucket on the most effective portion of the ladder or on the ledge of the ladder if there is no ledge.
Scrub the moulding using a sponge dipped until clear of any dirt in the water. Dry using a towel when completed.
Sand the moulding with three grits of sandpaper. Start with 80-grit sandpaper to remove the big and paint scratches and blemishes. Move onto the 120-grit sandpaper to buff out the scratches made up of the 80-grit sandpaper. Finish using a 220-grit sandpaper to produce an area that is smooth on the moulding. No scratches should be obvious now.
Brush a way sanding dust using a clean paint brush as-needed. Following the sanding is finished, wipe the area entirely using a tack cloth.