To Re-Stain a Table

So that they seem new, refurbish tables. The stain on a dining table becomes scraped and slim with use. Unlike tables, which need laborious and time re-finishing and scraping, tables that are stained just need a brand new coat of stain as well as minimal prep work. In the event that you coat the dining table using the same or darker colour in relation to the last stain restaining perform best. Discolorations naturally soak to the wood, rather than protect it-like paint, therefore an aged, dark stain colour can not be lightened with this no frills strategy.

Mix 8 parts water with 2 components ammonia. Dampen a cloth in the solution and wipe the whole table, such as the legs down. The ammonium hydroxide remove any furniture wax deposits and grime. Wipe dry promptly.

Sand the dining table area with 400-grit sandpaper to get rid of the varnish coating that is glossy on the wood. Before the topcoat is eliminated, sand lightly together with the grain of the wood but the dining table continues to be smooth. Sand the exact same procedure being used by the legs. Use 0000-gauge steel-wool to sand the varnish from ornamental carvings and scrollwork on the legs.

Wipe down legs and the dining table using a cloth to get rid of deposits that is varnish and sawdust. Enable the wood to dry fully before moving forward.

Put on the stain using a paint brush, painting it on toward the grain. Wipe the extra stain in the table surface using a rag. Make use of a fine-trick artist’s paint brush to stain scroll-work or leg carvings. Enable the stain to dry fully, which usually takes between four and eight hours.

Apply another layer of stain following the first has dried. Multiple layers of stain enable while still attaining the required colour, the wood grain showing. Allow to dry if needed, and use a third layer.

Enable the stain. Paint a thin layer of varnish on the very top of legs and the dining table. Allow this to dry fully before utilizing the dining table.

See related