A small rip on a leather couch is the sort of thing your eyes instantly go to after you discover the problem. Ignoring the tear isn’t a choice — abandoned as-is, it will likely grow larger as the leather stretches and flexes from everyday usage of the couch. Mending a little tear does not require calling a professional upholsterer. Particular leather repair kits that have several tints enable you to whip up a repair color that matches your sofa. If performed well, the repair might not even be distinguishable from its surroundings.
Wipe the area enclosing the harm with leather cleaner applied to some dye-free cloth. If you don’t have any leather cleaner, then spray on a drop or two of liquid dish soap onto a damp dye-free fabric, then wash out the leather. Wipe the surface down with a fresh damp cloth, followed by a dry cloth. Employing a plain fabric each time guarantees no cloth dyes bleed onto the leather.
Inspect the torn area for any loose fibers or strings. Trim away loose fibers with small scissors. If any batting or stuffing sticks out in the hole, push the cloth back down inside the couch with the tip of the scissors.
Mix some of this leather repair solution with one or more tints in an empty container as well as the repair kit. Aim to get an specific color match for your torn sofa. Many kits include a color graph and mixing recommendations. Stir the mixture until it is blended completely. Test the tinted repair material on an inconspicuous area of the couch, like under an arm or on a bottom edge. Adjust the color as necessary until you get it as close as you possibly can.
Twist in your iron near the couch. Turn it on and select a low-heat alternative without steam.
Scoop up a small quantity of the tinted repair mixture with the kit’s enclosed spatula tool. Apply a thin coating of this substance over the tear as though you’re icing a cake, then including more thin layers before the tear isn’t obvious through the liquid.
Put the leather grain paper in the repair kit feel down over the repair.
Press the metal heating tool in the kit onto the hot plate part of the iron to warm it up. When it is warm, rub on the instrument over the grain paper to create a leather feel in the correct material since it cures over the tear. Permit the grain paper to cool for several minutes, then peel it away.