Trend Alert: Ampersands

Apparently, “and” is indeed out, “etc.” is so five minutes ago, and “&” has never been hotter. In researching the origins of this emblem, I fell down the rabbit hole of typography terms such as “ligature,” “grapheme” and “glyph,” and acquired a headache. Let’s go with the simple description of its roots: a shorthand way of writing et, which suggests “and” in Latin, as in “Et tu, Brute?”

Large or little, bronze or nickel, stenciled or lit up like Broadway, the ampersand is getting its moment. Here are the ways designers are incorporating them into home decor, and several of our favourite picks in the event that you want to purchase some for your house.

Urban Outfitters

Ampersand Marquee Light – $209
This electric signal celebrates the ampersand vegas style. Talking of typography and Vegas, I keep noticing The Neon Museum’s Boneyard in TV shows, films, and editorial style spreads, and dream of taking pictures there.

greige/Fluegge Interior Design, Inc..

A petite gray ampersand adds a typographical touch for this tablescape. The colour and size is only right with this grayscale artwork and varying sizes of prints.


Ampersand Wall Decor – $79.99
A bold red ampersand fills this modern canvas. Three of these in a row would be good on a wall.

Mustard Seed Interiors

A dash of brass adds visual balance to this holiday decor arrangement.

Bockman + Forbes Design

A contemporary and glamorous table gets component of its form from the ampersand.

The Country Porch

Galvanized & Symbol Single Hook – $7.95
That is such a clever symbol to work with on a hook; it’s like it’s saying “and do not overlook your scarf/purse/windbreaker!”

Kasey Buick

Lola B.’s makeup of eyeglasses and photos comprises the curves of the ampersand for an additional graphic punch.

It is possible to find similar ampersands similar to this one on Etsy.

Kasey Buick

Even when she loses the photographs, the ampersand remains. I would say this classic emblem deserves a nice white frame, would not you?


Ampersand Wall Mirror by Fluxglass – $46
If you are seeking to glam up your typography a bit, try a mirrored version of the emblem.

House Industries

House Industries – Things – Iron Ampersand – $250
This heavy cast-iron ampersand can serve as a doorstop, bookend, or enjoyable sculpture on a desk or tablescape.


Type Pillow – Ampersand 18″ x 18″ – $55
I really like the idea of “and” repeated and replicated. This pillow turns the ampersand to a contemporary print.

More typography in actions:
Houzz Tour: Designs for Every Space from Atypical Type A
The Details: Utilizing Typography in Design
Esty Designers at Home: VisuaLingual

See related

Trim Carpentry Tips and Tricks

Want to improve your trim carpentry skills? Look no further than our handy guide which contains trim handyman Little Rock tips from the pros. These tips will help you to get the job right the first time, and some of them will even save you time and money.

Use a Jack Miter

You must be asking yourself, what on earth is a jack miter? Well, a jack miter is created by combining a miter joint with a butt joint. The resulting tool will give you the needed strength to keep the wood in place while you’re working, which actually helps to minimize the creation of gaps. Using a jack miter also means that you’ll have a much thinner and less perceptible glue line, so it’s a really versatile tool!

Build a Large Assembly Table

Any handyman Little Rock AR job that you do will probably require that you start by assembling things like a large casing or a jamb. Having a large assembly table will make it much easier for you, because then you’ll have a nice flat surface to work on, enabling you to finish jobs faster.

Mark Casing Reveal

One of the best ways to get consistent reveals is to mark the casings right on the edge. All you need to do is mark it on both ends and in the middle so that you won’t have to guess. We recommend using a combo square for this purpose.

Record it on a Pitch Block

Use your pitch block to record the angle of the stairs you’ll be working on, including the rise and run. The pitch block can then be used as a template for your handrails and skirts, or you can use it to modify a miter saw. Just make sure to ‘back up’ what you’ve recorded by taking a snapshot of the pitch block with your phone, just in case you lose it by accident.  

Trim Clamps

It’s important to ensure that your miter fits tightly and accurately before the glue dries, which is why you need to apply pressure to it before it gets fastened. One of the best ways to do this is to cut 45-degree notches, and then screw them onto the trim. Alternatively, you can keep them in place using two extra clamps, get the clamp hooked onto the notches, and then tighten.

Weave Instead of Miter

Woven intersections on the ceiling can really add interest to a space. While popular, standard miters look pretty plain when compared to a woven intersection, and the latter typically withstands moisture and temperature changes much better than the miter.

Pocket Screws

Pocket screws are a versatile way to fasten things, and you can use them for a variety of Little Rock handyman applications. Plus, you don’t have to worry about the holes because you can cover them up with base molding afterward.

Measure from the 1-inch Mark

Oftentimes, getting your tape hooked up onto a piece of trim can be quite difficult. One way to simplify the process is to line the edge of the trim with the 1-inch mark. Then, subtract the extra inch once your tape has been hooked on to avoid itching it onto your saw.

The best way to Replace Wood Veneer

An ornamental area is added by thin layers of wood veneer to alternative furniture or a table. In the event the veneer in your furniture develops blisters, cracks or other kinds of injury, it is possible to replace the broken region with veneer. Veneer which is less than 50 years old generally has a glue which is heat-resistant and hard to eliminate, in accordance with Oakwood Veneer Company. The hide-glue on veneer that is older is generally more easy to eliminate with warmth programs.

Apply warmth using a heat gun to the edges of the veneer and pry the veneer using a putty knife away. Spot a steam iron right on the veneer in the event the veneer WOn’t come up. Steam as you operate the iron on the veneer area in a circular movement. Attempt to pry the veneer in the surface and repeat the procedure as frequently as required to eliminate the veneer.

Scrape the furniture area together with the putty knife to remove particles and glue. Fill grooves or any holes with wood dough to produce a level area. Cut straight edges over the sides of the gap using a straightedge along with a utility knife.

So you will know just how much alternative veneer to buy, measure the location. The veneer that is new should possess a thickness as near as feasible to the veneer that is old. New veneer is usually somewhat thinner than antique veneer, in accordance with “Wood” Journal.

Measure the gap in the veneer you will be repairing. Cut the veneer to coincide with form and the dimensions of the region, making certain that the grain matches the grain in the furniture surface. Test the piece to create sure it matches. Sand the edges of the piece to to match the gap in the event the piece is also tiny, or reduce a bigger piece.

Wipe the furniture and veneer surfaces having a clear cloth. Apply glue to the trunk of the veneer that is new and also to the the top of gap. Glue a piece of paper to the lower of the veneer in the event the veneer is thinner compared to veneer. Press the veneer to the furniture area and wipe-off excessive glue using a moist cloth.

Place a sheet of wax paper over the veneer that is glued and clamp the blocks of wood to bottom and the leading of the furniture area. Let the glue dry for a-T least 2 4 hours.

When the glue is dry, remove the clamps. If necessary, sand down edges to mix the veneer seams.

See related

Weed Handle of Creeping Bell Flowers

The creeping bellflower (Campanula rapunculoides) can rapidly dominate your garden. This plant will grow up over a fence. Even if you get the purple bell shaped flowers that arise from this weed appealing, the bell-flowers must be controlled by you until they become a nuisance.


Creeping bell-flowers generate between 1 5 and 3,000,000 seeds each year. To to manage the bellflower without totally eliminating it, you’re likely to have get rid of these immediately and to watch for the emergence of seedlings. This requires vigilance. When one of the seedlings starts to increase, you will discover a cluster of heart shaped leaves seem from the ground. Put on a pair of garden gloves, grab a garden trowel, and eliminate these clusters when you they are spotted by you.


Seeds aren’t the only way creeping spread that is bell-flowers. Their roots are just as much of an offender. This plant has two kinds of roots. First, you will discover the roots that stay near the the top of garden. Second, you will get the bellflower has roots that extend into the soil. Youare going to need to dig at least 6″ into the floor to remove all the roots to to manage the plant.


One of the two herbicides which can be effective in managing the bellflower plant is glyphosate. If progress has exceeded past your capacity to eliminate the plant yourself, use glyphosate. Glyphosate at the conclusion of starting or spring of the drop and follow the guidelines on the label of the manufacturer’s. The down-side to utilizing this merchandise is that it is going to also destroy any grass in the region that is near-by, and that means you will only be in a position to use it for place apps.


Dicamba is a herbicide which is safe to use near grass, yet nonetheless life-threatening to the bellflower. You will be in a position to use it mo Re broadly, although follow most of the directions on the item label to utilize the dicamba securely. In accordance with Montana College, you can need to utilize several apps, a week aside, to acquire total handle on the bellflower.

See related

Secrets Your House Locksmith Won’t Tell You

Ever wondered what interesting secrets your locksmith may be hiding from you about their profession? Neither did we, but that was until we came across these interesting facts from handyman services Peoria IL, which could potentially help you to bump up your security while saving a ton in locksmith fees.

Contractors Are Not Good at Installing Deadbolts

The deadbolts installed by contractors almost always come up with problems that require the help of a locksmith, whereas the problem could have been easily avoided if the thing was installed right in the first place.

Use a Double Cylinder Lock

While you may feel safe with your thumb-turn lock, consider the fact that a burglar won’t need a key in order to unlock it. They can easily access it by breaking the window glass and reaching for it. On the other hand, a cylinder lock requires a key which makes it safer for you and difficult for burglars to mess with.

Buy Your Safe from a Reputable Seller

Try not to purchase your safe from an auction, flea market or estate sale. Not only will it cost hundreds of dollars for you to open the safe after you’ve purchased it, but it’ll probably be dirty as well.

Rekey the Locks When You Buy a New House

When moving into a new house, make sure to rekey all the locks so that there’s no chance of the previous tenants gaining access to your new home.

Don’t Buy Cheap Locks

Most of the locks available at big-box stores are produced en-masse and are really low-end, which doesn’t make them very safe. However, if you must purchase a key from one of the big chain stores, make sure that’s it’s a grade 2 at least, which means it’s a little rare.

Don’t Feel Bad if You Have to Call the Locksmith Twice

Most handyman Peoria IL are used to being called out multiple times per day because it is their work after all. So, don’t beat yourself up about calling out the locksmith regularly. They may even give you some tips to help you avoid or fix the problem yourself next time.

Call Only One Locksmith

While most locksmiths can appreciate the level of anxiety you feel when you’ve locked yourself out of your house or car, it would be inconsiderate of you to call more than one at a time. Rather be patient and make sure that the one locksmith that you do call understands the level of urgency in your situation.

After Hours Rates Are More Expensive

handyman Peoria charge considerably higher rates for late night call outs than they do for normal hours. A job that would usually cost you $50 during the day can hike up to $100 at 1 A.M.

Try the Door

Sometimes when you think you’re locked out, it might just be a slight glitch in the door, and giving it another try may just open it without the need to call a locksmith.

The best way to Create a Hole By Means Of a Tile Wall

Tiles are a type of man-made compressed rock and handled to appear stunning on wall or a ground. Meaning they’re challenging and require specific resources in the event that you if you want to to to hold some thing after installation, to drill through. Unfortunately, the sole way you’ll actually be in a position to to hold that shelf, mirror or tile rack would be to face the the task. This job needs lots of persistence, time as well as the use of several tricks that are professional to perform.

Measure width and the height of the installation location. Place a bit of low-tack masking tape in the middle of the region and mark the center that is precise on the tape.

Determine wherever your hole wants to be, utilizing the middle mark as a manual level. Like, when mounting a mirror you want to calculate the the length to the middle of the plate in the middle of the mirror. Then calculate up that length out of your center stage on the wall and place an extra bit of tape using the precise middle marked onto it.

Plan the dimensions of the hole required. To get a wall anchor, the dimensions of the hole would be the be the same as the anchor’s diameter. For junction boxes, the hole is going to be larger in relation to the box.

With masking tape cover the entire are to be cut. This prevents the drill bits while you drill from slipping over the tile. Use a compass to attract the proper-dimension hole on the tape.

Fit the drill having a carbide-tipped tile- you require. Select a bit that’s as broad as the width of the hole if reducing a-square hole.

Set the drill on its cheapest drilling velocity. Set the bit contrary to the tile, li-ning it up or mark you drew.

Begin drilling gradually, implementing a really minor a mount of strain on the on the drill. It’s going to need a moment therefore endurance is a should. You’ll feel a re-lease in the resistance once you attained the wall behind it and have drilled every one of the way.

Back the drill to your drywall bit from the wall and alter the bit. Increase the drill pace and carry on drilling through the dry wall. When you attain the open-space supporting the drywall you may feel a launch of strain. From the hole gradually, when this occurs, again the drill.

Score across the lines in the event that you require a-square hole. This really is a measure which will enable the tile while being cut rather of breaking in a routine.

Cut along the scored lines having a handheld jig saw fitted with tile-slicing blades. Without implementing stress on the cut gradually and mist the blade sometimes to pace the procedure up and minmise odds for breakage.

Cut a-way the drywall remaining in the hole utilizing a dry wall noticed. The jig saw blades aren’t lengthy enough to minimize every one of the way.

Clean any dirt and particles in the wall having a rag a-way. Vacuum out the hole to eliminate dirt you can’t attain together with the dirt rag.

See related

How to Finish Concrete

One of the most satisfying moments you can experience when working with concrete is when you get that smooth finish at the end of a job. The smooth finish is the result of arduous work that involves concentration, skill, and having the right tools.

Not everyone is able to get it, especially not on the first try, and if you’ve always struggled to get the smooth Gilbert flooring finish that you desire then you’ll enjoy today’s article, because  we’ve compiled a helpful guide where we share what tools and techniques you should combine in order to get your intended result. To complete the task will take you no more than a day, and costs will probably be in the region of $20 to $100, depending on what tools and materials you already have on hand.

While you might want to start by working on a slab right away, for this first practice run, we recommend that you use a garbage can pad instead. A smaller can pad is easier to manage at this stage and will get you ready for a slab, which usually dries quickly and requires experienced hands.

Screed the Concrete

First, you need to screed the concrete by moving a screed board on top of the form in a push and pull motion. This’ll help you level out the concrete and make sure that there isn’t any excess. You can flatten the surface further using a darby, this time using an overlaying motion, as you’ll be using a handheld tool.

Edge the Concrete

A small amount of water will seep to the surface after you’ve done screeding so you should wait until it dissipates before moving onto the next step, which is to edge the flooring Gilbert AZ. You should avoid waiting for too long, as the concrete might start to set. This edging process involves smoothing the edges to remove excess concrete so that they’re smooth and round.

Float the Concrete

The next step is known as ‘floating’ the concrete. This happens when you swish the magnesium lead on the concrete in sweeping strokes to smooth over any marks that might be left on the surface. Then, wait a little for the surface part of the concrete to harden before you smooth it over evenly, using a steel trowel. While you’re required to use light force with the lead, you’ll have to apply your strength with the trowel and put a bit of pressure when swaying it, an action which should be done in large arc intersections to ensure a truly smooth finish.  

Create a Non-Slip Surface

The last step is to add some texture to the smoothed surface by sweeping a broom over the surface, going from one end of the slab to the other in a dragging motion. This will help to prevent people from slipping when walking on the flooring Gilbert surface while adding a distinct appearance to it.

One of the most important considerations to keep in mind when working with concrete is to be patient. Your hand needs to be steady and your mind focused to avoid making any mistakes.

The best way to Remove Stickers

Stickers typically have a stress-sensitive adhesive that results in a residue that is gummy. You’re left having a sticky region that becomes a magnet for just about any dirt or grime in the region when these stickers finish on an appliance, like a fridge or stove. If the producer put the sticker or was put later, correct elimination removes the residue.

Insert the edge of a knife or spatula under the the fringe of of the sticker. Lift up the corner and remove as much of the sticker as feasible. In the event the sticker features a shiny coating, you have to remove the whole part that is shiny.

Hold a blow dryer three inches away from your sticker if it’s not going to remove. Heat the sticker using the air in the dryer to loosen the adhesive peel away it using spatula or the knife.

Dampen a cotton ball with vinegar or rubbing alcohol. Rub vinegar or the alcohol on the adhesive, completely soaking it.

Buff the adhesive in the appliance surface having a washcloth that is tough. Reapply the alcohol and rub a time that is 2nd to eliminate any remaining adhesive.

A cleaner on the the applying area. Use a cleaner designed for for the materials, including a glass cleaner on oven glass or an all purpose cleaner for an area. Wipe down the area using a clean rag to remove any residue or streaks.

See related

The best way to Fix Rattling Windows

When you’ve got shaky, a door slams or rattling windows that threaten to to interrupt every time an airplane passes over, they require some consideration. Rattling windows happen when the body shrinks or when personal glass panes become free. Homeowners who want to have a more quiet house can resolve this issue in just several hours. Tightening the windows will reduce your electricity bill and stops drafts. Monitor windows through the year and also make adjustments according to changes that are seasonal.

Add Weatherstripping

Close the window but leave it unlocked. Observe the window to find out which part of the window shakes — the lower or upper sash.

Open the window and clear any particles in the windowsill away using a damp cloth. Remove dirt, bugs and mildew entirely. You require a dry and clear area for the weather-stripping. Close the window and clear the sash using the damp cloth.

Raise the window and calculate width and the monitor length. Add 6″ to the size measurement and subtract 1/8 inch from the width. Cut two strips of linoleum in line with the measurements you’ve got taken.

Slide 6″ of a linoleum strip on the correct side of the body, pushing it between the sash as well as the window-frame. Secure the strip into place utilizing a hammer along with carpet tacks. Use caution with all the hammer to prevent breaking a window. Make tiny, managed faucets, maybe not swings.

Repeat the installation for the side that is left. Cut strips for the sash if required. Close the window and install the linoleum strips and hammer.

The linoleum stripping using a silicone spray. Close and enhance the several times to the window to get a smooth glide.

Repair Rattling Frames

Locate. By touching the panes together with your fingers it’s possible for you to identify these. They’re free in the event the frames shift.

Caulk the windowpanes having a silicone-centered window caulk. Use the fringe of of a little putty knife or an outdated credit card or a device to drive the caulk to the cracks.

Clean up excessive caulk having a fabric dampened with water and vinegar. Wipe a-way the caulk that is additional. Allow the caulk.

See related

10 Painting Tips & Techniques

Have you ever wondered whether it was possible for you to get the perfect results with a paint job without calling in the experts? It is, indeed, possible. In fact, with a few guidelines, you can do Mesa painting in your home without any problem.

Here are some tips to help you:

Avoid Lap Marks

Lap marks occur when you apply paint unevenly, especially when you apply a layer on a section that has not dried properly. To avoid lap marks, make sure your paint strokes are overlapping one another before the previous one starts to dry. Always make sure that the roller is at least half-loaded with paint.

Mix Paint in a Large Bucket

To get consistent results, mix all the paint you need in a large container. Running out of paint and mixing a fresh can in the middle of the job will almost certainly end up with a noticeable difference. Get your estimates right and then mix paint for the entire job.

Paint the Trim First

Professional painters have a unique order when painting. They start with the trim, the ceiling and then finish up with the walls. The concept here is that it will be easier for you to remove the tape from the trim than the walls. Besides, this will allow you to paint over the drips from the trim.

Avoid a Blotchy Finish

A blotchy finish will make your work look sloppy. The sheen might not be consistent either. This usually happens because of the cracks and holes you might have patched with a drywall compound or filler. Before you paint, always make sure you prime these patches until you get a fine texture.

Let the Paint Dry for a Perfect Edge

To achieve a perfect edge, you should first allow the paint to dry out. Once that is done, you can then cut the tape loose. If you pull it off abruptly, you will end up pulling paint off the walls, which might leave an unsightly impact. Also, make sure you cut the tape at 45 degrees for the best results.

Roll Paint along the Edges for Consistent Texture

To get a consistent texture, roll the paint near the trim, especially on the parts close to the trim and the corners because they get brushed over when doing Mesa painters. For consistency, use a roller over them after brushing the paint just before the paint dries out.

Clean Dirty Surfaces

Never paint over a dirty surface. Clean the walls first to remove the debris, so that the paint will bond strongly to the wall. You do not want to have paint peeling off your walls a few weeks or days after you finish the job.

Use Cotton Drop Cloths

Whether you are careful or not, you will still have splatters when applying paint. Don’t use plastic drop cloths because they stay wet for a long time, and you will end up with an untidy workplace. Instead, use cotton drop cloths because they will absorb the paint.

Sand Trim between Coats for Ultra-Smooth Finish

Between each coat, try and sand the surface so you won’t have a grainy texture when you are done. Make sure you use a proper sanding sponge. This allows you to apply pressure evenly and also reach into crevices where sandpaper can’t reach.

Feather Paint with a Dry Roller

In some sections, you might not be able to maintain a wet edge. This applies to parts like stairwells, the ceiling or a very tall wall. To reduce lap marks, simply feather paint along the edges that don’t stay wet.