In my job I get to meet senior people who think that you can commission an outside agency to go out and listen to consumers. “But its so easy” I tell them. “Get out of your office, go to the tills and talk to the shoppers – those who are buying and those who aren’t”.

In b2b it’s a bit more complicated. Instead of having a point-of-sale (a blouse rack for instance) where decisions and transactions are made, there is a much more complex interaction between the supplier and the customer. Designers, production engineers, buyers, planners, logistics, marketing support, installation and service engineers, managers, sales reps and accounts are all bringing their influence to bear on the relationship. We’ve all seen a case where, after months of hard work by everyone, initiated by strategic marketing and business development and carried on right through the operation involving the production and quality people, the relationship with the new customer goes sour because of something that was said or done by the fina

One day the factory recruited a consultant. Some people thought of him as a Work Study engineer. Others saw him as a Time and Motion expert. But, judging by his daily fee, he really was a consultant. This chap reviewed all of the operations. There was nothing he could do to improve the production lines; they were already very efficient. But when he arrived in the assembly department he had an idea that would make things better.

The consultant arranged to have holes drilled into each bench. These were special holes. At the bottom they were in the shape of the bolts. Above that they widened out to accommodate the washer. This meant that the assembly workers could put the nut, bolt and washer together using just one hand. Or, as the consultant explained, the assemblers could now do two jobs at the same time, which meant that they only needed half as many people. This was used by the consultant to justify his big fat fee. He took his cheque, thanked the management and left.

Some time later the factory management were talking to a CRM expert. He said that the most important asset they had was their customers. The CRM expert wanted to talk to the customers. In fact, what he really wanted was for the factory managers to go out and listen to their customers, but he had to sell the idea first. So, off he went to the biggest customer. In order to see the supply chain at first hand he decided that he should travel with the van driver who made the deliveries.

When they got to the customer’s factory he was introduced to the warehouseman, the buyer, the production engineer, the design team and the works manager. They had a long chat about the quality of the products, the timeliness of deliveries, the accuracy of the invoices and the layout of the quality certificates.

He was then given a guided tour of the works. They had one big assembly unit and one small pre-assembly shop. In the pre-assembly shop sat a group of workers at a big bench. On the bench sat one of the large boxes that the van driver had just delivered and three smaller boxes. Each worker was taking units out of the box, unscrewing them, and then placing the nuts, bolts and washers into each of the three smaller boxes.

But this is just a fairy story. Why? Because CRM and the whole Customer Relationship Management idea has been hijacked by the database manufacturers. What was once the simple but highly effective philosophy of getting feedback from your customers is now just another computerised three-letter-acronym database being sold by the likes of Oracle and Sieble. The database lineage probably began with MRP (material requirement planning), which begat MRPII (manufacturing resource planning), which begat ERP (enterprise resource planning) with SAP on the side (and nobody even knows what SAP stands for). It’s a fairy story because a “CRM expert” would never suggest listening to the customers.

Many years ago, back in the ‘70’s, I worked for a firm that supplied M&S with clothing. It was the most successful company in its field, supplying M&S when it was at its height. Each week the boss would go into the stores and watch the ladies shopping. When one picked up a blouse, looked at it and put it back on the rail he would pounce and ask her “why”. And when someone decided to buy he’d pounce again. He knew what they were buying and why, and what they weren’t buying, and why. My boss didn’t do this just in the UK. Once a fortnight he and the head designer (there were over 100 people employed in the design studio alone) flew to New York on Concorde to see what the Americans were buying. He knew the customers and boy, did it show in our figures.

In my job I get to meet senior people who think that you can commission an outside agency to go out and listen to consumers. “But its so easy” I tell them. “Get out of your office, go to the tills and talk to the shoppers – those who are buying and those who aren’t”.

In b2b it’s a bit more complicated. Instead of having a point-of-sale (a blouse rack for instance) where decisions and transactions are made, there is a much more complex interaction between the supplier and the customer. Designers, production engineers, buyers, planners, logistics, marketing support, installation and service engineers, managers, sales reps and accounts are all bringing their influence to bear on the relationship. We’ve all seen a case where, after months of hard work by everyone, initiated by strategic marketing and business development and carried on right through the operation involving the production and quality people, the relationship with the new customer goes sour because of something that was said or done by the finan

Some time later the factory management were talking to a CRM expert. He said that the most important asset they had was their customers. The CRM expert wanted to talk to the customers. In fact, what he really wanted was for the factory managers to go out and listen to their customers, but he had to sell the idea first. So, off he went to the biggest customer. In order to see the supply chain at first hand he decided that he should travel with the van driver who made the deliveries.

When they got to the customer’s factory he was introduced to the warehouseman, the buyer, the production engineer, the design team and the works manager. They had a long chat about the quality of the products, the timeliness of deliveries, the accuracy of the invoices and the layout of the quality certificates.

He was then given a guided tour of the works. They had one big assembly unit and one small pre-assembly shop. In the pre-assembly shop sat a group of workers at a big bench. On the bench sat one of the large boxes that the van driver had just delivered and three smaller boxes. Each worker was taking units out of the box, unscrewing them, and then placing the nuts, bolts and washers into each of the three smaller boxes.

But this is just a fairy story. Why? Because CRM and the whole Customer Relationship Management idea has been hijacked by the database manufacturers. What was once the simple but highly effective philosophy of getting feedback from your customers is now just another computerised three-letter-acronym database being sold by the likes of Oracle and Sieble. The database lineage probably began with MRP (material requirement planning), which begat MRPII (manufacturing resource planning), which begat ERP (enterprise resource planning) with SAP on the side (and nobody even knows what SAP stands for). It’s a fairy story because a “CRM expert” would never suggest listening to the customers.

Many years ago, back in the ‘70’s, I worked for a firm that supplied M&S with clothing. It was the most successful company in its field, supplying M&S when it was at its height. Each week the boss would go into the stores and watch the ladies shopping. When one picked up a blouse, looked at it and put it back on the rail he would pounce and ask her “why”. And when someone decided to buy he’d pounce again. He knew what they were buying and why, and what they weren’t buying, and why. My boss didn’t do this just in the UK. Once a fortnight he and the head designer (there were over 100 people employed in the design studio alone) flew to New York on Concorde to see what the Americans were buying. He knew the customers and boy, did it show in our figures.

In my job I get to meet senior people who think that you can commission an outside agency to go out and listen to consumers. “But its so easy” I tell them. “Get out of your office, go to the tills and talk to the shoppers – those who are buying and those who aren’t”.

In b2b it’s a bit more complicated. Instead of having a point-of-sale (a blouse rack for instance) where decisions and transactions are made, there is a much more complex interaction between the supplier and the customer. Designers, production engineers, buyers, planners, logistics, marketing support, installation and service engineers, managers, sales reps and accounts are all bringing their influence to bear on the relationship. We’ve all seen a case where, after months of hard work by everyone, initiated by strategic marketing and business development and carried on right through the operation involving the production and quality people, the relationship with the new customer goes sour because of something that was said or done by the fina

Quality Booklet Printing
With booklets being used by small and large businesses, it can mirror a company’s quality as well as showing products and services with attractive illustrations. They can be very straightforward, instructive and very effective.If you are wondering how to get the best results with your project, learning how the online printing market works is a good asset. To know the things you need and comparison of services to maximize your booklets requires only little investment on research and assessment.Today, with most marketing strategies need is a good advertising plan. This will cover everything to make use of first-hand advertisement; a quality booklet is the first thing a business can show to a client, delivering colorful images and specific services that can entice. But looking for the best quality booklet printing is your primary step. Here are some of the tips to get quality booklets from start to finish.useman, the buyer, the production engineer, the design team and the works manager. They had a long chat about the quality of the products, the timeliness of deliveries, the accuracy of the invoices and the layout of the quality certificates.

He was then given a guided tour of the works. They had one big assembly unit and one small pre-assembly shop. In the pre-assembly shop sat a group of workers at a big bench. On the bench sat one of the large boxes that the van driver had just delivered and three smaller boxes. Each worker was taking units out of the box, unscrewing them, and then placing the nuts, bolts and washers into each of the three smaller boxes.

But this is just a fairy story. Why? Because CRM and the whole Customer Relationship Management idea has been hijacked by the database manufacturers. What was once the simple but highly effective philosophy of getting feedback from your customers is now just another computerised three-letter-acronym database being sold by the likes of Oracle and Sieble. The database lineage probably began with MRP (material requirement planning), which begat MRPII (manufacturing resource planning), which begat ERP (enterprise resource planning) with SAP on the side (and nobody even knows what SAP stands for). It’s a fairy story because a “CRM expert” would never suggest listening to the customers.

Many years ago, back in the ‘70’s, I worked for a firm that supplied M&S with clothing. It was the most successful company in its field, supplying M&S when it was at its height. Each week the boss would go into the stores and watch the ladies shopping. When one picked up a blouse, looked at it and put it back on the rail he would pounce and ask her “why”. And when someone decided to buy he’d pounce again. He knew what they were buying and why, and what they weren’t buying, and why. My boss didn’t do this just in the UK. Once a fortnight he and the head designer (there were over 100 people employed in the design studio alone) flew to New York on Concorde to see what the Americans were buying. He knew the customers and boy, did it show in our figures.

In my job I get to meet senior people who think that you can commission an outside agency to go out and listen to consumers. “But its so easy” I tell them. “Get out of your office, go to the tills and talk to the shoppers – those who are buying and those who aren’t”.

In b2b it’s a bit more complicated. Instead of having a point-of-sale (a blouse rack for instance) where decisions and transactions are made, there is a much more complex interaction between the supplier and the customer. Designers, production engineers, buyers, planners, logistics, marketing support, installation and service engineers, managers, sales reps and accounts are all bringing their influence to bear on the relationship. We’ve all seen a case where, after months of hard work by everyone, initiated by strategic marketing and business development and carried on right through the operation involving the production and quality people, the relationship with the new customer goes sour because of something that was said or done by the fina

Recognition Generates Greater Motivation
In an atmosphere that can be profusely stressful, exhausting and down-right demanding, the majority of employees still strive to give their ‘all’ in the workplace. On behalf of this, many companies offer awards to their staff in recognition of that dedication and hard work.Everyone appreciates being appreciated. And when that recognition is not only realized, but also rewarded, it can really motivate an individual to ‘keep up the good work’ and additionally, strive even harder in many cases. The feeling of pride one takes in their work is commendable, however it’s usually self-contained. But being presented with that achievement award in the company of co-workers, counterparts and even clients can bring both the employee and the employer to a whole new level of respect for each other.For employers, it’s actually recommended that commendations be given on as regular a basis as possible. Giving rewards spari

obably began with MRP (material requirement planning), which begat MRPII (manufacturing resource planning), which begat ERP (enterprise resource planning) with SAP on the side (and nobody even knows what SAP stands for). It’s a fairy story because a “CRM expert” would never suggest listening to the customers.

Many years ago, back in the ‘70’s, I worked for a firm that supplied M&S with clothing. It was the most successful company in its field, supplying M&S when it was at its height. Each week the boss would go into the stores and watch the ladies shopping. When one picked up a blouse, looked at it and put it back on the rail he would pounce and ask her “why”. And when someone decided to buy he’d pounce again. He knew what they were buying and why, and what they weren’t buying, and why. My boss didn’t do this just in the UK. Once a fortnight he and the head designer (there were over 100 people employed in the design studio alone) flew to New York on Concorde to see what the Americans were buying. He knew the customers and boy, did it show in our figures.

In my job I get to meet senior people who think that you can commission an outside agency to go out and listen to consumers. “But its so easy” I tell them. “Get out of your office, go to the tills and talk to the shoppers – those who are buying and those who aren’t”.

In b2b it’s a bit more complicated. Instead of having a point-of-sale (a blouse rack for instance) where decisions and transactions are made, there is a much more complex interaction between the supplier and the customer. Designers, production engineers, buyers, planners, logistics, marketing support, installation and service engineers, managers, sales reps and accounts are all bringing their influence to bear on the relationship. We’ve all seen a case where, after months of hard work by everyone, initiated by strategic marketing and business development and carried on right through the operation involving the production and quality people, the relationship with the new customer goes sour because of something that was said or done by the fina

Lean Manufacturing System
A lean manufacturing system is a system that meets high throughput or service demands with very little inventory. The lean manufacturing system contains several important principles as well as a collection of tactical methods for achieving them. The key principles of lean manufacturing are discussed below.Value Streams: Let customers pull value through the enterprise by understanding what they want and then produce to meet real demand.Stretch for Perfection: Pursue perfection by continually identifying and eliminating non-value-added activities from all processes.Employee contribution: Involve employees in continual improvement and problem-solving activities.Quick Implementation: Implement a rapid plan-do-check-act improvement framework to achieve results fast.Performance Measurement: Use metrics and rapid performance feedback to improve real-time decision-making and problem-solving.t show in our figures.

In my job I get to meet senior people who think that you can commission an outside agency to go out and listen to consumers. “But its so easy” I tell them. “Get out of your office, go to the tills and talk to the shoppers – those who are buying and those who aren’t”.

In b2b it’s a bit more complicated. Instead of having a point-of-sale (a blouse rack for instance) where decisions and transactions are made, there is a much more complex interaction between the supplier and the customer. Designers, production engineers, buyers, planners, logistics, marketing support, installation and service engineers, managers, sales reps and accounts are all bringing their influence to bear on the relationship. We’ve all seen a case where, after months of hard work by everyone, initiated by strategic marketing and business development and carried on right through the operation involving the production and quality people, the relationship with the new customer goes sour because of something that was said or done by the finance department – all because when the customer finally arrives in Accounts they magically transmute into a debtor and are treated accordingly.

We here at InfoQuest do b2b customer satisfaction surveys. We have a unique way of doing them, which gives our customers an average response rate of between 70% and 75%. That is, provided we are given good information to begin with. But it really frightens me how little our clients sometimes know about their customers. I’m talking about the basics here. And I’m talking about multi-nationals and blue chip businesses that the outside world might think of as being world class.

The first step in the survey is for our client to draw up a list of their most important customers. Its up to them whether this is based on biggest turnover, most profitable or greatest growth potential, but they have to be customers – not suspects, not prospects but live accounts. Then the client’s most senior person writes a personal and personable letter to each one, asking for their help. Then we call them, to make sure they are willing to take part, but not there and then over the ‘phone. Sometimes the comments we get include: - “sorry, we no longer buy from them”; “Mr X died three years ago”; “Miss Y left the company two years ago”; “We’ve never heard of XYZ Company”; “We used to have one of their machines – we asked them to quote for a new one but they never came back to us”. And it’s very, very frightening.

Years ago, when firms ran MRP systems, there was usually someone responsible for maintaining the Bills of Materials, to keep them up to date, to stop the buyers buying stuff that was no longer used on the factory floor. Businesses today need a similar system for their customers. I’ve only come across one firm that does this. The European Quality Foundation (EFQM) has a nine-part model for business. The most important part of the model (at 19%) is customer feedback. TNT, the logistics company, was the EFQM business of the year and they are the only folks I know that call their customers every three months, religiously, simply to make sure they’ve got the correct contact details. Why don’t everybody’s sales reps do this?

HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.memberyou.net/article/38658/memberyou-A-Fairy-Story.html">A Fairy Story</a>

BB link (for phorums):
[url=http://www.memberyou.net/article/38658/memberyou-A-Fairy-Story.html]A Fairy Story[/url]

Related Articles:

How to Become a Fire Investigator

Part detective, scientist, engineer, and law enforcer, the fire investigator represents the collusion of multiple careers rolled into one. It is the fire investigator who must explore, determine, and document the origin and cause of the fire, establish what human actions were responsible for it, then bring authoritative testimony to the courtroom to win a conviction in cases of arson.

Those Who Do Not Worry About Incremental Changes in Marketing will Fail

So many business consultants and unworthy chief business advisors often say; Do not worry about Incremental Changes. Instead they tell us to focus on; Long Term Trends and they believe this is the way to success.

Meet The Media

Although media relations is not all there is to PR, it is a darned good, low cost way to spread the word. So here are a few media contacts to help you out.

Bookmark it: