ively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more

Recently, flashlights which use light-emitting diodes (LEDs) instead of conventional light bulbs have become available. LEDs have existed for decades, mainly as low-power indicator lights. In 1999, Lumileds Corporation of San Jose, CA introduced the Luxeon LED, a high-power white-light emitter. For the first time this made possible LED flashlights with power and running time better than some incandescent lights. The first Luxeon LED flashlight was the Arc LS in 2001.

LEDs can be significantly more efficient at lower power levels, hence use less battery energy than normal light bulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours, although the LED efficiency advantage diminishes at higher power levels. LEDs also survive sharp blows that often break conventional light bulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlight becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more p

e Luxeon LED, a high-power white-light emitter. For the first time this made possible LED flashlights with power and running time better than some incandescent lights. The first Luxeon LED flashlight was the Arc LS in 2001.

LEDs can be significantly more efficient at lower power levels, hence use less battery energy than normal light bulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours, although the LED efficiency advantage diminishes at higher power levels. LEDs also survive sharp blows that often break conventional light bulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlight becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more

icantly more efficient at lower power levels, hence use less battery energy than normal light bulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours, although the LED efficiency advantage diminishes at higher power levels. LEDs also survive sharp blows that often break conventional light bulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlight becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more

vels. LEDs also survive sharp blows that often break conventional light bulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlight becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more

ively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more powerful LED lights do generate significant amounts of heat. For this reason higher-powered LED flashlights usually have metal bodies and can become warm during use.

A headlamp is a flashlight worn on the head for hands-free operation. Powerful headlamps mounted on helmets have been used in mining for decades, but general-purpose ones with fabric straps are now also available.

Sometimes a light is mounted to a handgun or rifle.

Most flashlights are cylindrical in design, with the lamp assembly attached to one end. However, early designs came in a variety of shapes. Many resembled lanterns of the day, consisting largely of a box with a handle and the lamp attached to the front. Some others were made to have a similar appearance to candles. It is possible that future developments of battery and LED technology will bring interesting new designs. For instance, one very small light that exists now in 2004 consists of a few LEDs with a switch, designed to be an end ca