ere is little need to protect it; your customer database cannot so easily be replaced. Once you have identified the information you need to back up, you need to know where it is stored. Although it might seem counter-intuitive at first, as much of your critical data as possible should reside in one place on the network. It is far simpler and easier to backup, restore and protect one machine than several. As a side benefit, physical and network access to that machine (and therefore to critical and perhaps sensitive data) can more easily be restricted, improImagine this - you arrive one morning to find that a faulty read-write head has crashed your server's hard disk overnight, rendering it useless. Or a small electrical fire has destroyed part of your office, including your server. This server was used to store customer lists, payroll details, accounting details, purchase orders, inventories and other data vital to the running of your business, built up after years of operation and growth.

You find that you were seriously ill-prepared to deal with such a disaster. Virtually all of your business' data had resided in this one location. No copies were made. You are faced with the fact that many years' worth of data has been lost forever.

Insurance will replace materials, equipment and office space, but will that be enough to get your business up and running again? Your vital business data can't be claimed on insurance, it can't be replaced with money alone. Would your business survive after significant data loss? Unless you have a good backup system already in place, the statistics are grim...

* 43% of companies that experience a severe data loss disaster, and that have no recovery plan in place, never re-open.

* 70% of companies that suffer serious data loss go out of business within 12 months.

* It takes 19 days and costs US$17,000 (AUD$22,000) to manually retype 20 megabytes of sales data. The same volume of accounting data takes 21 days and costs US$19,000 (AUD$25,000).

* Loss of data cost US businesses in excess of 22 billion dollars in 2004.

Just as the costs of fire damage can't be covered by insurance bought after the event, the costs of data loss can't be avoided by acting after the loss has occurred. It is vitally important that data is backed up before encountering hard disk failure, viruses, malicious software, mistakes by employees or other causes of lost data.

Listed below are the 7 steps that we consider essential for the protection of important data.

1. Central storage of data on the network

The first step in setting up a backup system is deciding what needs to be backed up. Ask yourself, what can I afford to lose? For example, the latest Windows Service pack can be downloaded again, so there is little need to protect it; your customer database cannot so easily be replaced. Once you have identified the information you need to back up, you need to know where it is stored. Although it might seem counter-intuitive at first, as much of your critical data as possible should reside in one place on the network. It is far simpler and easier to backup, restore and protect one machine than several. As a side benefit, physical and network access to that machine (and therefore to critical and perhaps sensitive data) can more easily be restricted, improv

d resided in this one location. No copies were made. You are faced with the fact that many years' worth of data has been lost forever.

Insurance will replace materials, equipment and office space, but will that be enough to get your business up and running again? Your vital business data can't be claimed on insurance, it can't be replaced with money alone. Would your business survive after significant data loss? Unless you have a good backup system already in place, the statistics are grim...

* 43% of companies that experience a severe data loss disaster, and that have no recovery plan in place, never re-open.

* 70% of companies that suffer serious data loss go out of business within 12 months.

* It takes 19 days and costs US$17,000 (AUD$22,000) to manually retype 20 megabytes of sales data. The same volume of accounting data takes 21 days and costs US$19,000 (AUD$25,000).

* Loss of data cost US businesses in excess of 22 billion dollars in 2004.

Just as the costs of fire damage can't be covered by insurance bought after the event, the costs of data loss can't be avoided by acting after the loss has occurred. It is vitally important that data is backed up before encountering hard disk failure, viruses, malicious software, mistakes by employees or other causes of lost data.

Listed below are the 7 steps that we consider essential for the protection of important data.

1. Central storage of data on the network

The first step in setting up a backup system is deciding what needs to be backed up. Ask yourself, what can I afford to lose? For example, the latest Windows Service pack can be downloaded again, so there is little need to protect it; your customer database cannot so easily be replaced. Once you have identified the information you need to back up, you need to know where it is stored. Although it might seem counter-intuitive at first, as much of your critical data as possible should reside in one place on the network. It is far simpler and easier to backup, restore and protect one machine than several. As a side benefit, physical and network access to that machine (and therefore to critical and perhaps sensitive data) can more easily be restricted, impro

ss disaster, and that have no recovery plan in place, never re-open.

* 70% of companies that suffer serious data loss go out of business within 12 months.

* It takes 19 days and costs US$17,000 (AUD$22,000) to manually retype 20 megabytes of sales data. The same volume of accounting data takes 21 days and costs US$19,000 (AUD$25,000).

* Loss of data cost US businesses in excess of 22 billion dollars in 2004.

Just as the costs of fire damage can't be covered by insurance bought after the event, the costs of data loss can't be avoided by acting after the loss has occurred. It is vitally important that data is backed up before encountering hard disk failure, viruses, malicious software, mistakes by employees or other causes of lost data.

Listed below are the 7 steps that we consider essential for the protection of important data.

1. Central storage of data on the network

The first step in setting up a backup system is deciding what needs to be backed up. Ask yourself, what can I afford to lose? For example, the latest Windows Service pack can be downloaded again, so there is little need to protect it; your customer database cannot so easily be replaced. Once you have identified the information you need to back up, you need to know where it is stored. Although it might seem counter-intuitive at first, as much of your critical data as possible should reside in one place on the network. It is far simpler and easier to backup, restore and protect one machine than several. As a side benefit, physical and network access to that machine (and therefore to critical and perhaps sensitive data) can more easily be restricted, impro

by acting after the loss has occurred. It is vitally important that data is backed up before encountering hard disk failure, viruses, malicious software, mistakes by employees or other causes of lost data.

Listed below are the 7 steps that we consider essential for the protection of important data.

1. Central storage of data on the network

The first step in setting up a backup system is deciding what needs to be backed up. Ask yourself, what can I afford to lose? For example, the latest Windows Service pack can be downloaded again, so there is little need to protect it; your customer database cannot so easily be replaced. Once you have identified the information you need to back up, you need to know where it is stored. Although it might seem counter-intuitive at first, as much of your critical data as possible should reside in one place on the network. It is far simpler and easier to backup, restore and protect one machine than several. As a side benefit, physical and network access to that machine (and therefore to critical and perhaps sensitive data) can more easily be restricted, impro

ere is little need to protect it; your customer database cannot so easily be replaced. Once you have identified the information you need to back up, you need to know where it is stored. Although it might seem counter-intuitive at first, as much of your critical data as possible should reside in one place on the network. It is far simpler and easier to backup, restore and protect one machine than several. As a side benefit, physical and network access to that machine (and therefore to critical and perhaps sensitive data) can more easily be restricted, improving security.

2. Multiple backups

You don't want to have all your eggs in one basket. There are many reasons why your company should have access to several full system backups.

* A single backup could fail. Tapes, CDs and hard drives all wear out eventually, so you shouldn't rely 100% on a single backup to store your data. The more copies you have, the less likely you are to lose all of your data to wear, fire damage, water damage, etc.

* In the case of accidental deletion, data loss is often noticed days after it occured, which means that if your only backup is from last night, you have no way of retrieving the data.

* Restoring files that were deliberately deleted months or even years ago, when you thought you would never need them again, can often be of great benefit.

3. Off-site backups

If your office burns down, you don't want all your backups to burn with it, so it's important to physically move some of your backups off-site. We recommend that any weekly, monthly, quarterly and yearly backups are stored off-site at a secure location.

4. On-site backups

While it is important to have some backups off-site, you don't want to have to travel back and forth whenever you need to retrieve a file. For this reason it's useful to have recent daily backups available on-site to allow for quick recovery of files. These backups are still important, and for reasons of security and reliability it is best to store them in a secure place such as a fireproof safe, rather than next to the server or on the System Administrators desk.

5. Monitoring

If you need to restore a file or a whole system, you want to be sure that all backups completely successfully. It would be disastrous to learn that your backups had failed only when you attempt to perform a restoration. One way to ensure that each backup has been performed successfully is to check the backup logs each day. An easier method is to acquire backup software that notifies you daily of the backup status and can alert you to any problems.

6. Follow the plan

If you are using tapes, disks or removable hard drives for backing up, you will need to remember to change these regularly depending on the backup