Tags |
|
|
Links |
|
|
Member You - The Lucrative Oil Rig Career Path
Did you know that 80% of all sales are made after the 5th contact? The biggest mistake we make is not following up with our clients regularly. We not only lose the chance to offer other services and products, we lose the chance for satisfied clients' referrals. Building your practice needs consistent bi-monthly follow-ups. If you think this takes too much time, follow my lead and delegate some of it where you will spend only 6-8 hours a week. Remember, only marketing and promotion builds income and business, the rest are expenses. Part one of this article is available at www.bookcoaching.com/freearticles/article-138.shtml. Here's the ten ways to follow-up with coaching clients: 6. Follow-up in two steps. In the first follow-up, give a free report using your sparkling signature file as a soft sales piece. In a week, follow this up with your offer. Refer to the report, and then make your one irresistible offer. If I sent a report on what web sites need before contacting a web master, I follow it
lubricate moving parts,
regularly check tongs and spinning chain,
operate boilers,
ensure emergency shut-offs are tested and operational,
maintain a supply of hand tools, and
help other members of the crew.
Motorhands are also responsible for helping to train Floorhands and Leasehands. Power tong operators operate hydraulic power tongs which are used to connect casing as it
It was two days before our shoot. I was in the office with the client going over the story boards and filling him in on all the details for his latest television campaign. At that time, with my agency being in its infancy stage, we were taking in any client we could, which is why I was seated across from the Redneck Crazy Man as I liked to refer to him. He owned a string of low end rental car shops and his only redeeming quality was that he was a quick pay.For this particular shoot, my script involved an NBA star and a good looking young boy I had cast through a local talent agency. The boy had been in a few commercials and he knew how to take direction which is crucial when it comes to working with children.As I was going over the script, the client stopped me mid-sentence, put a picture of a boy in front of me and said, What ya think about this kid? Not sure what he had up his sleeve this time, I looked at the picture of the 10 year old boy. Hes cute, why? I asked. Cause hes gonna be in the commercials. He said deadpan. But Ive already cast a boy through the talent agency whos perfect! Hes co
Leasehand oil rig positions are entry-level. The position exists to help inexperienced individuals become familiar with the activities around an oil rig. Individuals beginning as Leasehands can move up to the position of Floorhand within a short period of time depending on their ability and availability of other positions at the oil rig site.
Leasehands perform various duties around the oil rig. They may be required to load and unload trucks, build fences, dig ditches, and assist other crew members with maintenance and pre-job preparedness. Leasehands are also responsible for housekeeping on the rig and often do extensive go-for driving on remote winter roads.
Floorhands on oil rigs spend a lot of time working on the oil rig floor. There are usually two floorhands on a crew but smaller rigs often have only one. In general, floorhands on oil rigs
use wrench-like tongs to smoothly and quickly connect and disconnect the lower parts of the drill pipe when it is being lowered into and raised from the hole,
clean and maintain equipment,
catch samples of drilled cuttings to be analyzed,
assist in laying casing into a well after it has been drilled, and
assist other members of the oil rig crew wherever needed.
Floorhands are also responsible for "housekeeping" on the rig:
cleaning the oil rig floor, and
painting or scrubbing around the rig.
An experienced Floorhand may move into the position of Motorhand. Motorhands, as with all positions, do not earn their position by equipment knowledge and function alone. It is earned by achieving safe work ethics, knowledge of procedures and by following (not deviating from!) those procedures.
Motorhands are responsible for operating and maintaining the engines that power the drilling equipment. These include the engines that
run the draw-works to hoist the drill pipe,
turn the rotary table (which turns the drill bit), and
circulate the drilling fluid.
There are usually three to four diesel engines and several electrical engines on the oil rig. When not busy with the engines, motorhands
lubricate moving parts,
regularly check tongs and spinning chain,
operate boilers,
ensure emergency shut-offs are tested and operational,
maintain a supply of hand tools, and
help other members of the crew.
Motorhands are also responsible for helping to train Floorhands and Leasehands. Power tong operators operate hydraulic power tongs which are used to connect casing as it
In history, envelopes have been used and proved to be a good packaging medium. They are effective and widely being used for carrying letters, with variation on sizes and shapes. Within your first impression of envelopes, they surely are only being used for its purpose, a pack, protection for mails. Of course, you can always enhance your message to a recipient whether its only a business reply envelope, corporate envelope, direct mail envelope, billing envelope, there are endless ways to customize an envelope and envelope printing can enhance its packaging.Envelopes have different sizes and formats. There are pocket envelops and a banker envelopes, the size varies depending on the size of the document inside. Along with quality material, envelops are widely used for handling documents whilst being sent or kept.In helping your business niche, envelopes carry the name of your company or simply have fancy prints to make them look pleasing to any recipient. Here are some of the benefits you can get when having a customized print on your envelopes.With those window envelopes, having a custom print can always expose exce
Leasehands perform various duties around the oil rig. They may be required to load and unload trucks, build fences, dig ditches, and assist other crew members with maintenance and pre-job preparedness. Leasehands are also responsible for housekeeping on the rig and often do extensive go-for driving on remote winter roads.
Floorhands on oil rigs spend a lot of time working on the oil rig floor. There are usually two floorhands on a crew but smaller rigs often have only one. In general, floorhands on oil rigs
use wrench-like tongs to smoothly and quickly connect and disconnect the lower parts of the drill pipe when it is being lowered into and raised from the hole,
clean and maintain equipment,
catch samples of drilled cuttings to be analyzed,
assist in laying casing into a well after it has been drilled, and
assist other members of the oil rig crew wherever needed.
Floorhands are also responsible for "housekeeping" on the rig:
cleaning the oil rig floor, and
painting or scrubbing around the rig.
An experienced Floorhand may move into the position of Motorhand. Motorhands, as with all positions, do not earn their position by equipment knowledge and function alone. It is earned by achieving safe work ethics, knowledge of procedures and by following (not deviating from!) those procedures.
Motorhands are responsible for operating and maintaining the engines that power the drilling equipment. These include the engines that
run the draw-works to hoist the drill pipe,
turn the rotary table (which turns the drill bit), and
circulate the drilling fluid.
There are usually three to four diesel engines and several electrical engines on the oil rig. When not busy with the engines, motorhands
lubricate moving parts,
regularly check tongs and spinning chain,
operate boilers,
ensure emergency shut-offs are tested and operational,
maintain a supply of hand tools, and
help other members of the crew.
Motorhands are also responsible for helping to train Floorhands and Leasehands. Power tong operators operate hydraulic power tongs which are used to connect casing as it
Radio has always been popular. It has always been a good source of news, music, story telling and fun. Even nowadays with all the new inventions and technology that are available a lot of people listen to radio regularly. There are now may sources to get information from or relax to, but radio still keeps a strong position in a number of audience however with Internet and television its popularity decreased a little.Commercial radio is a relatively newcomer having only been born in 1973. It has been experiencing substantial growth over the last three years, both in terms of audience and advertising revenue. Since the beginning of 1999, as one can see in chart 1, listening to commercial radio has increased by 11%. Covering the last three months of 2001, RAJAR reports that weekly reach is up by 1 million to 31.9 million listeners per week that is 66% of the population tuning in each week. Since 1999, advertising revenue has consistently grown faster than in any other media. The radio sector saw increased spending by some advertisers such as car manufacturers, including MG Rover, Fiat and Toyota, according to the Radio Advertisi
clean and maintain equipment,
catch samples of drilled cuttings to be analyzed,
assist in laying casing into a well after it has been drilled, and
assist other members of the oil rig crew wherever needed.
Floorhands are also responsible for "housekeeping" on the rig:
cleaning the oil rig floor, and
painting or scrubbing around the rig.
An experienced Floorhand may move into the position of Motorhand. Motorhands, as with all positions, do not earn their position by equipment knowledge and function alone. It is earned by achieving safe work ethics, knowledge of procedures and by following (not deviating from!) those procedures.
Motorhands are responsible for operating and maintaining the engines that power the drilling equipment. These include the engines that
run the draw-works to hoist the drill pipe,
turn the rotary table (which turns the drill bit), and
circulate the drilling fluid.
There are usually three to four diesel engines and several electrical engines on the oil rig. When not busy with the engines, motorhands
lubricate moving parts,
regularly check tongs and spinning chain,
operate boilers,
ensure emergency shut-offs are tested and operational,
maintain a supply of hand tools, and
help other members of the crew.
Motorhands are also responsible for helping to train Floorhands and Leasehands. Power tong operators operate hydraulic power tongs which are used to connect casing as it
Fraud Symptom Categories1. Internal Control Problems - material weakness The first thing to remember when looking at internal controls is the fraud triangle. Without all three elements of opportunity, pressure and rationalization it is less likely that fraud will occur. By creating controls that prevent these elements or detect them in a timely manner after occurance managers can effectively monitor compliance.Specific internal control issues stem from the organizations structure. Examples of symptoms of control deficiencies include a lack of the following: segregation of duties, independent verification, proper authorization, physical safeguards, overriding the system in place, and proper documentation.2. Analytical Irregularities These symptoms are unusual relationships of current financial statement ratios are compared to prior years. The analytical tests identify those transactions that are extreme cases and fall outside of the normal distribution of values. Common examples include: shortages of inventory, the use of too many credits to accounts r
Motorhands are responsible for operating and maintaining the engines that power the drilling equipment. These include the engines that
run the draw-works to hoist the drill pipe,
turn the rotary table (which turns the drill bit), and
circulate the drilling fluid.
There are usually three to four diesel engines and several electrical engines on the oil rig. When not busy with the engines, motorhands
lubricate moving parts,
regularly check tongs and spinning chain,
operate boilers,
ensure emergency shut-offs are tested and operational,
maintain a supply of hand tools, and
help other members of the crew.
Motorhands are also responsible for helping to train Floorhands and Leasehands. Power tong operators operate hydraulic power tongs which are used to connect casing as it
The most common form of business security is the alarm system. Nowadays, business security technology can make your business extremely secure and provide the peace of mind. Both wired and wireless alarm systems are available in the market.The more thriving your business, the more interest it is likely to produce amongst intruders. In order to protect your business one of the primary things you need to do is set up safe cash flow practises. This includes correct recording procedures with regular appraisal. Often it has been found that the company's own workers tend to steal from the cash flow. Installing a monitored security alarm can guarantee business safety by keeping an eye on the workers and also lessen the amount of time a criminal is on premises and therefore restrict possible loss. Apart from monetary safeguard, it is also crucial to provide protected environment to the employers and the customers.The monitored alarms systems can be easily installed and can be supervised by professionals at a monitoring centre. Business security alarms protect all points of entry - doors and windows. Some of them also spot movement
lubricate moving parts,
regularly check tongs and spinning chain,
operate boilers,
ensure emergency shut-offs are tested and operational,
maintain a supply of hand tools, and
help other members of the crew.
Motorhands are also responsible for helping to train Floorhands and Leasehands. Power tong operators operate hydraulic power tongs which are used to connect casing as it is lowered.
An experienced Motorhand may move into the position of Derrickhand. Derrickhands work in the derrick on oil rigs, high above the rig floor on a platform called a monkeyboard. Derrickhands use a harness and platform climbing device to get to the proper position on the derrick when drill string (lengths of pipe) or casing pipe is being raised from or lowered into the hole. On the derrick, Derrickhands:
Guide the lengths of pipe into and out of the elevators, and
Steady each pipe while it is being connected to or disconnected from the drill or casing string.
Derrickhands on oil rig crews spend about 20% of their time up in the derrick. At other times during drilling, they:
Control the viscosity and weight of the drilling fluid or "mud,"
Listen to mud pumps and check them regularly for vibration and other problems,
Maintain and repair mudtanks and related equipment,
Prepare mud reports and instruct the crew handling chemical additives,
Ensure that the derrick is inspected before raising or lowering,
Help the driller with the operation and maintenance of equipment, and Assist in training new crew members.
Not everyone on a oil rig crew is capable of becoming a good derrickhand. Individuals who do not feel comfortable working in high places do not usually move into this position. However, those wishing to become drillers (see the Drillers profile) must have a good understanding of the derrickhand's duties.
Responsibilities among other things are:
To act as the Drillers representative around the rig to ensure and report back to him if any deviations from policy occur and support the Drillers role.
To conduct activities set by directions given by the Rig Manager and Driller and to report any change in programs given to him by the Well Site Consultant immediately.
After the Rig manager, the driller has the most senior position on the rig. The Driller is in charge of the operation of the rig and crew during their tour. They are primarily in control of operating the oil rig and hoisting equipment, and managing the rig floor and driller?s console which includes brakes, throttles, clutches and various gauges.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.memberyou.net/article/11639/memberyou-The-Lucrative-Oil-Rig-Career-Path.html">The Lucrative Oil Rig Career Path</a>
BB link (for phorums):
[url=http://www.memberyou.net/article/11639/memberyou-The-Lucrative-Oil-Rig-Career-Path.html]The Lucrative Oil Rig Career Path[/url]
Related Articles:
Joint Ventures - How Much to Charge
Strengthen Your Corporate Brand Image For Optimum Results
Bookmark it:
|